Parker Fast & Tite Polypropylene Thermoplastic Fittings
Parker FAST-TITE 壓縮式塑料接頭
Parker FAST-TITE COMPRESSION STYLE PLASTIC FITTINGS
Brass, Composite and Thermoplastic Fittings and Valves
Fluid System Connectors

派克 Fast&Tite壓縮式接頭，使用無泄漏密封，無需借助其他工具，可以在幾秒內完成安裝。該系列接頭滿足 FDA 以及 NSF-51 標準要求，能夠與食物直接接觸使用。派克Fast&Tite壓縮式接頭，可以無需其他工具，在幾秒內即可完成安裝，無需管夾或者其他調整即可實現緊密，可靠的無泄漏密封。 其結構包括一個獨特的卡爪用來固定管子，以及丁腈橡膠O形圈，在手緊安裝后，確保與管子之間形成有效的密封。Parker's Fast & Tite fittings installs in seconds without tools for a leak proof seal. Fast & Tite meets FDA and NSF-51 requirements for food contact.Parker's Fast & Tite fittings are a compression style fitting that installs in seconds without tools and provides a tight, sure, leak proof seal without clamps or adjustments. A unique grab ring for tube retention, coupled with a Nitrile o-ring creates a positive seal and assures good tube retention with only hand tight assembly.Use with soft metal, glass tubing and the following Parker Parflex Division tubing.

適配管子：軟質金屬管，玻璃管，以及來自派克Parflex 事業部的以下材料的管子：

- PE 管
- 尼龍管
- PP 管
- PU 管
- PTFE 管
- FEP 管
- PFA 管

Parker FAST-TITE 壓縮式塑料接頭
Parker Fast & Tite Compression Style Thermoplastic Fittings

Parker Fast & tite Polypropylene Thermoplastic FittingsParker Fast & Tite Polypropylene Thermoplastic Fittings are a compression style fitting that installs in seconds without tools and provides a tight, sure, leak proof seal without clamps or adjustments. A unique grab ring for tube retention, coupled with a nitrile o-ring creates a positive seal and assures good tube retention with only hand tight assembly. Parker Fast & Tite fittings meet FDA and NSF-51 requirements for food contact.

Parker Fast & Tite Fittings Fast & Tite Thermoplastic Fittings
Parker Fast & Tite Thermoplastic Fittings
Parker Fast & Tite Polypropylene Thermoplastic Fittings
Compression Style Plastic Fittings, Fast-Tite

市場Markets：

- 水過濾處理 Water Filtration
- 飲料分配 Beverage Dispensing
- 包裝 Packaging
- 生命科學 Life Science
- 灌裝 Bottling
- 半導體 Semi-Conductor

特征/優勢：

- 材料：白色或者黑色聚丙烯，或者白色尼龍
- 無需借助工具，數秒內即可完成安裝
- 卡爪：302 不銹鋼材料，用于固定管子
- 丁腈橡膠O形圈，形成有效的密封
- 符合FDA，NSF-51
- 手緊安裝

性能特點

最低工作溫度 (F) -40 （尼龍）-0 （聚丙烯）
最低工作溫度 (C) -40 （尼龍）-18 （聚丙烯）
最高工作溫度 (F) 200 （尼龍）212 （聚丙烯）
最高工作溫度 (C) 93 （尼龍）100 （聚丙烯）
最大工作壓力 (PSI) 50 - 300
最大工作壓力 (BAR) 3.5 - 20
管材 熱塑管，玻璃管，軟質金屬管
媒介 水，空氣，氣體兼容流體
應用 過濾，純化，分配
夾持環 302 不銹鋼
O 型圈 丁腈橡膠
行業標準 FDA, NSF-51

應用Applications：

- 水路 Water Lines
- 飲料管路 Beverage Lines
- 食品 Food
- 冷卻系統 Cooling Systems

可根據客戶需要提供定制化結構和尺寸。請聯系派克Fluid System Connectors Division，撥打010-84282935或發郵件至fcg.cnmec@parkerdistribution.com.cn 以獲得更多信息。

COMPLIANCE, CERTIFICATIONS, & SAFETY
- Brass, Composite and Thermoplastic Fittings and Valves Cat. 3501E USA December 2016
- Certificate of Registration for Albion, IN facility - 07-013
- Certificate of Registration for Kent. OH facility - 97-882h
- Certificate of Registration for Lakeview, MI facility
- Certificate of Registration for Otsego, MI facility
- Conflict of Minerals
- FSC REACH Product Declaration
- Management System Certificate for Otsego, MI
- Quick Reference Guide - 3500-QRG
- RoHS Product Declaration
- Tijuana ISO 9001
- Brass Composition
- Certificate of Insurance
- Safe Drinking Water Act
- Parker Thermoplastic Fittings and Valves

LITERATURE AND REFERENCE MATERIALS
- Brass, Composite and Thermoplastic Fittings and Valves Cat. 3501E USA December 2016
- Quick Reference Guide - 3500-QRG
- Water & Beverage Connectors - CAT.3525LQ1

PRODUCT DEMOS & TUTORIALS
- Water/Beverage Market